Mercedes Sprinter DRIVER Side Cargo Door Window L Shape FIT KIT AND U TRIM 07-18

  
Mercedes Sprinter 2007 - 2018. Mercedes Sprinter 2018 - 2023. Ford Transit 2015 - 2023.

Mercedes Sprinter DRIVER Side Cargo Door Window. WITH BONDING KIT AND U TRIM. Mercedes Sprinter DRIVER Side Rear Cargo Door Window L SHAPE WITH BONDING KIT AND U TRIM.

DRIVER SIDE REAR CARGO DOOR. Mercedes Sprinter 140 Wheel Base 2007 - 2018.

Wheel Base 2007 - 2018. 1 x Mercedes Sprinter DRIVER Side Rear Cargo Door Window L SHAPE AS PICTURED.

1 x 1 Tube Bonding Kit. 1 x U Trim Used To Cover The Cut Edge. Our glass meets international safety standards these include: Worldwide Dot Standards, USA Federal Motor Vehicle Safety Standards. Bonded window - No external seal or gasket. Privacy Stained glass (not a tinting film).

Tinted to 80% allowing 20% of light to pass through. CNC Cut glass for an overall OEM fit. NO BADGE OR BADGE COVER SUPPLIED. 1 x Tube Sika Urethane Adhesive.

1 x Primer Stick With Applicator. 1 x Glass Wipe/Panel Wipe. 1 x Bonding Kit Instruction Manual. Used To cover the cut edge.

Goes over both the inner lip and cut edge. Gives a neat and tidy professional finish. Fitting Kit Tips and Hints. To achieve a structural bond between glass and metal work the surface must be clean and free from grease or dirt. Use the cleaning wipe on the glass and metal work.

Primer is applied to both surfaces. The metal work and the metal work.

Primer must be in contact with the adhesive. The adhesive (urethane) is a vehicle glazing specific product, Urethane has a fairly thick consistency, if it was runny it wouldn't stay in place when the adhesive is applied or when the window is pushed into the adhesive. To aid its application its recommended to use a caulking gun with a higher lever ratio. Pre Heating the adhesive tube prior to use is also beneficial if your using a standard caulking gun or a higher ratio adhesive gun. A heat gun/hairdryer can be used for this to gently heat it.

The adhesive must be applied in one continuous run on the metal work with no gaps. The U Trim is used to cover the cut edge.

Its fitted before the window is bonded in and trimmed to length. To fit simply push the trim over the factory metal stampings and the outer cut edge. Please use appropriate protective equipment when fitting. If in any doubt get a professional in to do the job for you, goes without saying that Van Tek Glass Accept no responsibility for fitting or the inability to fit.

Mercedes sprinter 2007 - 2018. Mercedes sprinter 2018 - 2023.

Ford transit 2015 - 2023. Welcome to Van Tek Glass! From our warehouse in Huntington Beach USA we supply Glass windows for your Mercedes Sprinter, Ford Transit, Ram Promaster. We also stock a variety of different sized bunk windows.

We have been in the vehicle glazing industry for just over 15 years now, after fitting windows for many of those years we now focus on supplying glass at the best prices we can without compromising on quality We understand that you want good quality windows at a good price, and you would like what you ordered as fast as possible and that's exactly what we can do for you! If you a conversion company or fitting windows for the first time we are here to help, just give us a shout if you need it!

Thanks so much for reading. Items ordered incorrectly would be the buyers responsibility for return costs. Shop our huge range of deals and offers to find what's right for you. If your unhappy then please just get in touch and we'll sort it out.

Member since: Oct 30, 2022.